Wyłącznie przez przypisanie w DHCP adresu MAC. Jeżeli przypisanie w DHCP nie działa, to znaczy że... router jest uszkodzony
Bzdura!!!
te same problemy są z wLightBoxS, sam moduł odrzuca adres proponowany przez serwer DHCP.
Wystarczy przeanalizować komunikacje z modułem i widać jak na dłoni że moduł odrzuca proponowany adres IP.
100% wina leży po stronie modułu. Co to za oprogramowanie które nie daje możliwości ustawienia statycznego adresu IP _
wycinek z analizy, na czerwono odrzucenie przez moduł adresu:
17:08:09.699654 IP (tos 0x0, ttl 64, id 577, offset 0, flags [DF], proto UDP (17), length 328)
192.168.1.1.67 > 192.168.1.45.68: [udp sum ok] BOOTP/DHCP, Reply, length 300, xid 0xabcd000b, Flags [none] (0x0000)
Your-IP 192.168.1.45
Client-Ethernet-Address 5c:cf:7f:40:2f:34
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: ACK
Server-ID Option 54, length 4: 192.168.1.1
Lease-Time Option 51, length 4: 86400
Subnet-Mask Option 1, length 4: 255.255.255.0
Default-Gateway Option 3, length 4: 192.168.1.1
Domain-Name-Server Option 6, length 4: 192.168.1.1
17:08:09.705963 IP (tos 0x0, ttl 128, id 17, offset 0, flags [none], proto UDP (17), length 336)
0.0.0.0.68 > 255.255.255.255.67: [udp sum ok] BOOTP/DHCP, Request from 5c:cf:7f:40:2f:34, length 308, xid 0xabcd000c, Flags [none] (0x0000)
Client-Ethernet-Address 5c:cf:7f:40:2f:34
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message Option 53, length 1: Decline Requested-IP Option 50, length 4: 192.168.1.45
17:08:12.450167 IP (tos 0x0, ttl 49, id 40496, offset 0, flags [DF], proto TCP (6), length 40)
91.121.77.89.8080 > 192.168.1.45.14564: Flags [F.], cksum 0xaef2 (correct), seq 0, ack 1, win 29200, length 0
17:08:15.931559 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has 192.168.1.45 tell 192.168.1.1, length 28
--- End Of Stream ---